|
|
|
| |
|
|
1-phase, 3-phase AC motors,
brake motors, geared motors
- In different versions, motor sizes 6 to approx. 200 W
- Motors can be combined with different gears
(parallel, right angle)
Gearbox module, parallel shaft output
1-phase, 3-phase AC motor
Gearbox module, shaft output rightangled |
|
| |
|
|
|
|
|
| |
|
|
1-phase
AC motor
- 2-4-6 pole version
- With different capacitor versions, motor sizes from IEC 56 to
IEC 100, housing in aluminium
- Available with UL/CSA certificate
|
|
| |
|
|
|
|
|
| |
 |
|
3-phasen
AC motor
- Pole-changing version, 2-4-6 and 8 pole version
- Power range: 0.09 kW to 30 kW, aluminium housing
- Motor sizes from IEC 56 to IEC 180
- Available with UL/CSA certificate
|
|
| |
|
|
|
|
|
| |
 |
|
IE2 und IE3 high
efficiency AC motor
- Available in 2-4-6 pole versions
- Power range from 0.75 kW to 40 kW
- Aluminium
housing
- Motor sizes from IEC 80 to IEC 180
- Various design / certifications (self- and forced-cooling, ...)
|
|
| |
|
|
|
|
|
| |
 |
|
AC gear motors
- 1-phase and 3-phase design
- 2 or 4 pole design
- All motors in design B5 or B14
|
|
| |
|
|
|
|
|
| |
 |
|
For
inverter operation, AC motors
- Designed for converter operation with forced cooling for
maximum
cooling at low speeds
- Configurable with encoders
- Customized solutions for bearings and windings are available
|
|
| |
|
|
|
|
|
| |
 |
|
AC brake motor
- Motor with brake for gradual and quiet braking
- 1-phase and 3-phase motor,
- 2-, 4-, 6-, 8-pole version, pole-changing
- Power range from 0.13 18.5 kW
- Available with UL certification
|
|
| |
|
|
|
|
|
| |
 |
|
AC brake motor
- Motor with brake for sudden and precise braking
- Available with DC or AC brake
- 1-phase or 3-phase motor
- 2-, 4-, 6-, 8-pole version, pole-changing
- Power range: up to 30 kW,
- UL certification on request
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor with low mass moment of inertia
- On request Shaft end available with saw blade clamping
device, flange or clamping cartridge
- Well suited for inverter operation
- 1-phase and 3-phase design
- In 2 and 4 pole design
- Power range from 0.13 kW to 15 kW
- Motor brake and UL certification on request
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor with hollow shaft design
- Motor for high-pressure pumps with direct coupling for optimum
alignment between motor and pump
- In 1-phase and 3-phase design
- Standard or flexible coupling on request
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor for gas and oil burners, hot air generation, drying ovens
- From IP20 to IP55
- Isolation class F or H
- Mounting with different flange versions - depending on power,
on request with two shaft ends
- Flexible coupling for direct connection with pump
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor for hydraulic pumps
- For hydraulic applications with special flange and shaft for
direct coupling with pump, the square flange fits the standard
pump housings
- Shaft can be customized and hardened
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor with inverter
- These motors are improved by integrating an inverter into
the terminal box
- This solution offers easy installation with high protection
rating (IP55)
- Saves space and wiring between inverter and motor
- Integrated filter available on request
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor with Atex EX d
- For hazardous areas according to European standards
- 1-phase and 3-phase design
- 2-, 4-, 6-, 8-pole, pole-changing
- Power range: 0.12 30 kW, IEC 56 to IEC 132
- Flameproof enclosure for zones 1, 2, 21, 22
- Modular aluminium motor with exchangeable feet and flanges
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor with Atex EX e
- Increased safety, 1-phase and 3-phase design
- 2-, 4-, 6-, 8-pole, pole-changing
- Power range: 0.12 30 kW, IEC 56 to IEC 160
Atex EX nA
- Non-sparking design for zones in which explosive gases can
occur very rarely and only briefly in normal applications
- All other technical characteristics such as motor previously
in EX e design
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor with Atex EX de
- This motor combines the flameproof design of motor EX d
with increased safety EX e
- 1-phase and 3-phase available
- 2-, 4-, 6-, 8-pole, pole-changing
- Power range: 0.12 30 kW, IEC 56 to IEC 132
- Modular aluminium motor with exchangeable feet and flanges
|
|
| |
|
|
|
|
|
| |
 |
|
Encapsulated, water-protected motor
- Using a special sealing material, the internal electrical parts
are completely water-protected
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor under oil
- Designed for use under hydraulic oil and can be directly
coupled
- Can be directly coupled and immersed with the pump in
the hydraulic tank
- Flange and shaft fit most commonly used hydraulic pumps
|
|
| |
|
|
|
|
|
| |
 |
|
AC motor in open execution
- Different applications (e.g. automotive) require an open version
with two bearing ends
- 1-phase and 3-phase motor
- 2-4-6 and 8 poles instead of a motor housing
- many performances and sizes
|
|
| |
|
|
|
|
|
| |
 |
|
Automatically produced windings
- Extensive selection of fully automatically manufactured stators
- outer dm from 80 mm to 152 mm
- Inner dm from 40 mm to 90 mm
- 1-phase and 3-phase version
- 2-4 and 6-pole, pole-changing
- Semi-automatic production: Outer dm from 73 mm to 200 mm,
inner dm from 38 mm to 125 mm, special
versions on request
|
|
| |
|
|
|
|
|
| |
 |
|
Handmade windings
- One of the largest productions in Europe
-
We wind stators from 55 mm to 1200 mm including phase
insulation
- Double impregnation or vacuum impregnation
- We also develop designs according to requirement profile
|
|
| |
|
|
|
|
|
| |
 |
|
Customized production of AC motors
- We are well known as a manufacturer of a wide range of
customer-specific motors
- Mechanical execution, electrical power, voltage and frequency
as well as individual motor solutions can be designed in
cooperation
|
|
| |
|
|
|
|
|
| |
 |
|
BQ Series - Vector-controlled AC servo motors
- High-performance motor with square housing
- Efficient stator cooling system, designed as external cooling
- Power range: Sizes from 80 to 500, output from 0.5 to 3,700 kW
- Good combination of high torque at simultaneously
continuously low speeds
|
|
| |
|
|
|
|
|
| |
 |
|
MA Series - Vector-controlled AC servo motors
- For variable speed applications
- Constant power mode at maximum speeds of up to 8000 rpm
- Efficient stator cooling system designed as external cooling
- Good size to torque ratio
- Power from 2.5 to 500 kW, sizes from 100 to 280
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Crameda
AG |
|
| |
Industrial Drives |
|
| |
Kirchstrasse 22 |
|
| |
CH-9113
Degersheim |
|
|
|
|
| |
Telephone +41 71 370 01 15 |
|
| |
swissinfo@crameda.com |
|
| |
|
|
| |
|
|
|
