|
|
|
| |
 |
|
Angular gear units – Bevel gear units
(also as motor gear units)
- Miniature version with two sizes, 035 and 045 mm edge length, reduction i = 1:1 to 4:1
- Standard version up to 5400 Nm, reduction ratio i = 1:1 to 6:1
- 9
gear sizes
- Housing steel or grey cast iron
- Robust, powerful,compact
- Spiral toothed wheelsets
- Maintenance-free |
|
| |
|
|
|
|
|
| |
 |
|
Angular gear units – Hygiene design
- Reduction i = 1:1 to 6:1
- Maximum output torque 430 Nm
- 4 gearbox sizes with 065 and 140 mm edge length
- Speed up to n1 = 3000 1/min
- Low backlash version with < 10 angular minutes possible
- Corrosion-resistant, hygienic, powerful
- All external parts made of VA, housing made of 1.4305 or 1.4581 |
|
| |
|
|
|
|
|
| |
|
|
Angular gear units – Hypoid gearboxes
(also as motor gearboxes)
- Reduction i = 5:1 to 83:1
- Maximum output torque 13720 Nm
- 6 gear sizes
- Speed up to n1 = 8000 1/min
- Housing made of aluminium
- Dynamic, powerful
- Hypoid gear sets
- Maintenance-free
|
|
| |
|
|
|
|
|
| |
 |
|
Angular gear units – Worm gear units
(also as motor gear units)
- Reduction i = 5:1 to 83:1
- Maximum output torque 13720 Nm
- 9 gear sizes
- Speed up to n1 = 3000 1/min
- Low backlash version with < 6 angular minutes possible
- Maintenance-free
|
|
| |
|
|
|
|
|
| |
 |
|
Gearboxes – parallel shafts
- Gear ratios from 3:1 to 200:1
- Version with solid and hollow shaft
- Torque up to 20 Nm
- Gears can be combined with AC and DC motors to
geared motors
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Crameda
AG |
|
| |
Industrial Drives |
|
| |
Kirchstrasse 22 |
|
| |
CH-9113
Degersheim |
|
|
|
|
| |
Telephone +41 71 370 01 15 |
|
| |
swissinfo@crameda.com |
|
| |
|
|
| |
|
|
|
